"A hub of learning & centre of excellence, Necessity is the mother of invention."

BRANCH :- MECHANICAL ENGINEERING
DRIEMS POLYTECHNIC

Approved Intake ;

  1. Regular(1st semester):- 240
  2. Lateral (3rd Semester) :- 48

Procedure of Admission

  1. Regular(1st semester):- Pass in HSC examination/10th standard examination conducted/ declared equivalent by BSE, Odisha and obtained at least 35% marks in each subject at the qualifying examination with Math, Science and English.
  2. Lateral (3rd Semester) :- Pass in +2 Science Examination from CHSE, Odisha or its equivalent Examination with PCM/ +2 Vocational( 2 years course) in any Engineering trades/ 2 years ITI in Engineering trade with Pass in HSC Examination / 10th standard examination conducted/ declared equivalent by BSE, Odisha & securing 30% marks in each subject.

Duration of Course

  1. Regular(1st semester):- 3 years
  2. Lateral (3rd Semester) :- 2 years

No. of Sections in Each Semester with Strength

  1. 3rd Semester- 04 Sections with each section Capacity of 60
  2. 5th Semester- 04 Sections with each section Capacity of 60

No.s Of Faculty

  1. HOD :- 01
  2. Sr. Lecturer/ Asst. Professor :- 06
  3. Workshop Superintendent :- 01
  4. Lecturer :- 16

Syllabus And Subjects Semester wise

1ST & 2ND SEMESTER (THEORY)

SL NO. SUBJECTS END EXAM MARK INTERNAL MARK ASSIGNMENT TOTAL MARK PASS MARK
01 ENGINEERING PHYSICS (BST-101) OR ENGINEERING CHEMISTRY (BST-102) 70 20 10 100 35
02 ENGINEERING MATHEMATICS-I (BST-103) 70 20 10 100 35
03 BASIC ELECTRICAL ENGINEERING (BET-101) OR BASIC ELECTRONICS ENGINEERING (BET-102) 70 20 10 100 35
04 ENGINEERING MECHANICS (BET-103) OR COMPUTER APPLICATION (BET-104) 70 20 10 100 35
05 COMMUNICATIVE ENGLISH-I (HMT-101) 70 20 10 100 35

1ST &2ND SEMESTER (PRACTICAL)

SL NO. SUBJECTS END EXAM MARK SESSIONAL MARK TOTAL MARK PASS MARK
01 ENGINEERING PHYSICS PRACTICAL(BSP-101) OR ENGINEERING CHEMISTRY PRACTICAL (BSP-102) 25 25 50 25
02 BASIC ELECTRICAL ENGINEERING PRACTICAL (BEP-101) OR BASIC ELECTRONICS ENGINEERING PRACTICAL (BEP-102) 00 25 25 13
03 ENGINEERING MECHANICS PRACTICAL (BEP-103) OR COMPUTER APPLICATION PRACTICAL (BEP-104) 00 25 25 13
04 ENGINEERING DRAWING (BEP-105) OR
WORKSHOP PRACTICE (BEP-106)
100 25 125 48
05 COMMUNICATIVE ENGLISH-I PRACTICAL(HMP-101) 00 25 25 13

3rd Semester (Theory)  

SL NO. SUBJECTS END EXAM MARK INTERNAL MARK ASSIGNMENT TOTAL MARK PASS MARK
01 ENGG. MATH-III (BST-301) 70 20 10 100 35
02 STRENGTH OF MATERIAL(MET-301) 70 20 10 100 35
03 ENGG. MATERIAL (MET-302) 70 20 10 100 35
04 THERMAL ENGG-I (MET-303) 70 20 10 100 35

3rd Semester (PRACTICAL)  

SL NO. SUBJECTS END EXAM MARK SESSIONAL MARK TOTAL MARK PASS MARK
01 MECHANICAL ENGG. DRAWING (MEP-301) 100 50 150 60
02 MECHANICAL ENGG. LAB (MEP-302) 75 25 100 50
03 WORKSHOP PRACTICE-II (MEP-303) 75 25 100 50

4TH SEMESTER (THEORY)  

SL NO. SUBJECTS END EXAM MARK INTERNAL MARK ASSIGNMENT TOTAL MARK PASS MARK
01 THEORY OF MACHINE (MET-401) 70 20 10 100 35
02 MANUFACTURING TECHNOLOGY (MET-402) 70 20 10 100 35
03 THERMAL ENGG. –II (MET-403) 70 20 10 100 35
04 FLUID MECHANICS & HYDRAULIC MACHINES (MET-404) 70 20 10 100 35
05 ELECTRICAL TECHNOLOGY (EET-421) 70 20 10 100 35

4TH SEMESTER (PRACTICAL)  

SL NO. SUBJECTS END EXAM MARK SESSIONAL MARK TOTAL MARK PASS MARK
01 FLUID MECHANICS & HYDRAULIC MACHINES LAB (MEP-401) 75 25 100 50
02 ELECTRICAL LAB PRACTICE EEP-421) 50 25 75 37
03 WORKSHOP PRACTICE-III (MEP-402) 50 25 75 37

5TH SEMESTER (THEORY) OLD SYLLABUS

SL NO. SUBJECTS END EXAM MARK INTERNAL MARK ASSIGNMENT TOTAL MARK PASS MARK
01 MANUFACTURING TECHNOLOGY-III 80 15 05 100 35
02 INDUSTRIAL ENGINEERING 80 15 05 100 35
03 REFRIGERATION AND AIR CONDITIONING 80 15 05 100 35
04 MECHANICAL ENGG. DESIGN 80 15 05 100 35
05 INSPECTION AND QUALITY CONTROL 80 15 05 100 35

5TH SEMESTER (PRACTICAL) OLD SYLLABUS

SL NO. SUBJECTS END EXAM MARK SESSIONAL MARK TOTAL MARK PASS MARK
01 MECHANICAL ENGG. LAB- III 50 25 75 37
02 INSPECTION AND QUALITY CONTROL LAB 50 25 75 37
03 PROJECT SEMINAR 50 50 100 50

6TH SEMESTER (THEORY) OLD SYLLABUS

SL NO. SUBJECTS END EXAM MARK INTERNAL MARK ASSIGNMENT TOTAL MARK PASS MARK
01 ENTREPRENEURSHIP AND INDUSTRIAL MANAGEMENT 80 15 05 100 35
02 AUTOMOBILE ENGINEERING 80 15 05 100 35
03 ENVIRONMENTAL AND POLLUTION CONTROL 80 15 05 100 35
04 ADVANCED MANUFACTURING PROCESS AND CAD/CAM 80 15 05 100 35
05 POWERPLANT ENGG 80 15 05 100 35

6TH SEMESTER (PRACTICAL) OLD SYLLABUS

SL NO. SUBJECTS END EXAM MARK SESSIONAL MARK TOTAL MARK PASS MARK
01 MECHANICAL ENGG. LAB- IV 50 50 100 50
02 CAD LAB   50 50 25
03 PROJECT WORK AND VIVA 50 50 100 50

No. of Theory Class Rooms :- 04 ( 3rd sem.) + 04 (5th sem.) = 08
Name of Laboratories with major equipments available

  1. HYDRAULICS AND THEORY OF MACHINE LAB

PELTON WHEEL TURBINE, FRANCIS TURBINE, CENTRIFUGAL PUMP, HYDRAULIC BENCH, BERNOULLIS APPARATUS TEST RIG, CAM ANALISIS

  1. HEAT POWER AND REFRIGERATION LAB

SINGLE CYLINDER TWO STROKE PETROL ENGINE, FIRE POINT, FOUR STROKE SINGLE CYLINDER DIESEL ENGINE, REFRIGERATION TUTOR
FLASH PIONT & MULTI CYLINDER FOUR STROKE ENGINE

  1. AUTOMOBILE LAB

DIFFERENTIAL SYSTEM, ELECTICAL SYSTEM OF AUTOMOBILES, GEAR BOX SYSTEM

  1. STRENGTH OF MATERIAL LAB

TORSION TESTING MACHINE, IMPACT TESTING MACHINE, UNIVERSAL TESTING MACHINE, FATIGUE TESTING MACHINE, SINGLE PURCHASE WINCH CRAB, COMPOUND SCREW JACK, WORM & WORM WHEEL, HARDNESS TESTING MACHINE
WORKSHOP

  1. TURNING SECTION

Lathe Machine, Grinding Machine, Power Hacksaw

  1. MACHINE SECTION

Shaper machine, Slotting  Machine , Milling Machine, Drilling Machine

  1. CARPENTRY SECTION

Wood lathe, Circular Saw, Bench Vice

  1. FITTING SECTION

Bench Vice , Drilling Machine

  1. WELDING SECTION

Bench vice, Welding machine

  1. SMITHY SECTION

Open Hearth Furnace, Electrical Blower, Anvil, Swage block

  1. INSPECTION AND QUALITY CONTROL LAB

Vernier Caliper, Outside Micrometer, Digital Micrometer, Dial test Indicator with Magnetic Stand, Vernier Height Gauge
Digital Vernier Height Gauge, Sine Bar, Screw thread Micrometer, Vernier Gear tooth Caliper, Surface plate

  1. SHEET METAL SECTION

Bench Vice

  1. FOUNDRY SECTION

ACADEMIC PERFORMANCE

YEAR % OF RESULT
2003-2006 54%
2004-2007 81.8%
2005-2008 48%
2006-2009 88%
2007-2010 87%
2008-2011 89%
2009-2012 98%
2010-2013 71.5%
2011-2014 54%

PLACEMENT POSITION

YEAR NO. OF STUDENT PLACED
2009-2012 BATCH 107
2010-2013 BATCH 152
2011-2014 BATCH 133
2012-2015 BATCH 117

CO-CURRICULAR ACTIVITIES

  1. All the students of Mechanical Engg. Branch participated in national label seminar i.e. INDUSTRIAL ROBOTICS which was conducted in our auditorium.
  2. This year the 6th sem Mechanical students are attained the seminar on the topic SIMULATION PROGRAMMING demonstrated by LIT BBSR in our seminar hall.
  3. In the year 2014 some of students of this branch also have taken part in the science exhibition in DRIEMS
  4. The student of our department are taken part in different co-curricular activities such as Debate, Essay, Quiz, Drawing & painting, Cricket, Football, Seminar not only in our college but also outside of the college.
  5. The student of our department secure champion position in inter branch cricket tournament.

OTHER CO-CORRICULAR ACTIVITIES

  1. This year our mechanical students are attained the social programme arranged by dept. of Sports And Youth Cultural Govt. of odisha in our auditorium.
  2. The students have participated in cultural activities in the college annual function.